Furthermore, there is a difference between a PSTN connection, which has a line with one line number and an extension range, and one which has one line with several MSNs.

In this configuration, the ISDN card is operated with a direct dialing-in ISDN line. This connection is assigned a phone number. An extension range is defined in addition to this number (The "Numbers" Tab). Each SwyxWare user can now be assigned one or more numbers from this extension range. A subscriber's complete telephone number is then e.g. composed of the phone number and the extension number.

Example:

When this configuration is used, it is possible to operate the ISDN card simultaneously with other ISDN devices using a common connection. When operating with MSNs, one or more MSNs are assigned to the ISDN trunk during configuration. SwyxWare thus only processes calls, which are directed to these MSNs. This makes it possible to assign additional numbers to other terminal equipment such as a fax machine. The MSNs listed in the configuration can be assigned in any way to the SwyxWare users. Since, to be unique, an MSN can only be assigned to exactly one user, the maximum number of users is limited by the number of available MSNs. Because the maximum number of MSNs is usually 10, this configuration is only recommended for smaller systems.

The Basic Rate Interface (BRI) provides 2 channels. Your provider can supply you with one line or with a line with several MSNs for your line connection.

The ISDN card SX2 QuadBRI can operate up to four Basic Rate Interfaces.

A Primary Rate Interface (PRI) is always a direct dialing-in line. In contrary to a Basic Rate Interface (BRI) with 2 available channels, it supplies a maximum of 30 available channels.

If the number of available channels is not sufficient, several lines can be combined in order to increase capacity. Both the switching and SwyxWare will treat this group of lines as a single line with a greater number of channels. A line with a free channel will be searched for automatically. This takes place in a way which is fully transparent for the user and it does not require any additional configuration.