help | 4 Editing General Settings | Expert settings
4.19 Expert settings
Under the menu item Expert settings you have the possibility to change some specific settings for different SwyxWare components.
* 
"Expert settings" are only intended for experienced SwyxWare administrators and can have a serious impact on the SwyxWare configuration. Please refrain from making any changes in this area if you are unsure about the possible consequences of your settings.
* 
In earlier SwyxWare versions these settings were defined via registry keys.
During a system update to v12.30 or newer, parameters defined via registry keys are not changed and transferred to the database. All future changes must be made in the "Expert Settings". This also applies to a new installation of the software.
Which expert settings are displayed?
The expert settings are grouped on tabs in different/multiple topics. The individual tabs are visible under the following conditions:
Tab name
Display requirements
IpPbxIMAP4
Visible when SwyxServer is successfully started.
IpPbxSrv
Visible when
*at least one client or device is connected,
*at least one call is made.
LinkMgr
Visible when at least one SIP trunk has been registered.
PhoneMgr
Visible when
*at least one device (HFA) is connected and configured,
*at least one firmware update is available for one of the connected devices.
Which administrators can see and edit the expert settings?
As SwyxWare administrator you have full access to the expert settings.
The expert settings can only be edited or viewed by the following SwyxON administrators:
SwyxON
Administrator profile
PlatformExpertSettingsRW
ServerExpertSettingsRW
ServiceExpertSettingsRW
ExpertSettingsRO
Advanced Platform Administrator
Platform Administrator
-
Advanced Partner Administrator
-
Support Administrator
-
-
-
Partner Administrator
-
-
-
UC Tenant Administrator
-
-
-
legend: = allowed for this administration profile
To set the expert settings 
1 Open Your user profile in the title bar on the right.
2 Select View | Enable Expert Mode.
*The Expert Mode is activated. The warning triangle icon appears in the title bar.
3 In the menu, select General Settings | Expert Settings.
4 Select the appropriate tab and define the required settings.
You can define following settings:
* 
In the fields with Boolean values ("True" or "False"), "0" means the option is disabled. "1" means the option is active.
Tab
Designation
Explanation
IpPbxIMAP4
FetchOnlyVoicemails
Specify whether the X-IpPbx... header should be used for an IMAP search (remote query).
*Default value = 1 (X-IpPbx...header is NOT used). All emails are queried and voicemails are sorted locally.
FetchTimeout
Set the interval for the FETCH command (e-mail query).
*If nothing is entered, the default value (30 seconds) is used.
 
FetchUnDeleted
If set and equal to "1", the IpPbIMAP4 module will use the command "UNDELETED" instead of "NOT DELETED" when searching for e-mail.
This is required as a workaround for the Domino Mail Server, since this server does not support the "NOT DELETED" command.
 
SearchUseFrom
Specify whether the FROM header should be used for an IMAP (remote) search (this does NOT work with Exchange 2007 and 2010).
*Default value = 0 (FROM header is used)
 
SearchZeroLengthString
The zero-length string is used in IMAP search to identify SwyxWare voicemails (remote inquiry).
*The default value is "".
For a successful IMAP search Exchange 2007 / 2010 requires the value " " ("<space>").
 
UseAuthenticatePlain
Specify whether IMAP authenticates using the AUTHENTICATE PLAIN or LOGIN mechanism (AUTHENTICATE PLAIN supports UTF-8; LOGIN supports ASCII symbol encoding only).
*Default value = 0 (AUTHENTICATE PLAIN)
IpPbxSrv
CallNotificationOn2ndCallDisabled
Specify whether the call notification should still be displayed on the second line if the second call is deactivated.
*Default value = 1 (call notification is NOT displayed)
CDRForAuxiliaryCallsDisabled
Specify whether CDR entries should also be written for CTI+ auxiliary calls (calls from/to the CTI+ controlled terminal).
*Default value is 0 (CDRs for additional calls are NOT written).
 
EnableTrunkCallEarlyMedia
Specify whether to use the media bridging functionality.
*Default value = 1 (media bridge is used.)
 
ExclusiveMediaFileEP
Specify whether to use the Media Manager exclusive mode for playfile endpoints. This mode should be activated if the waiting announcement is always to be played from the beginning in calls on hold.
*Default value = 1 (Exclusive mode is disabled).
 
PhoneCallListEntryCallForIsFirstRedirector
Specify whether the call display in the client should also include the original call destination before forwarding. This mode should be activated if the waiting announcement is always to be played from the beginning in calls on hold.
*Default value = 1 (The original call destination is NOT displayed).
 
RFC2833DTMFPayloadType
Set the RTP payload type for marking DTMF signals according to RFC2833.
*Default value = 101 (DTMF)
 
SkipGroupCallMembersWithActiveAway
Specify whether group members with the status "Away" are to be disregarded during a group call.
*Default value = 0 (group members with "Away" receive the calls).
 
SkipGroupCallMembersWithActiveDoNotDisturb
Specify whether group members with the status "Do not disturb" are to be disregarded during a group call.
*Default value = 0 (group members with "Do not disturb" receive the calls).
 
SuppressInternalNumbers
Specify whether the display of the call number should be suppressed for an internal call if the user has activated the "Hide number" function.
*Default value = 0 (The number for internal calls is always displayed).
 
SuppressNames
Specify whether the contact name display should be suppressed for an internal call.
*Default value = 0 (The contact name is displayed for internal calls)
 
TrunkCallRetryOnBusyOrReject
Specify whether call repetition should also be performed for a call over the trunk that was disconnected by "Busy" or "Reject".
*Default value = 0 (no call repetition)
 
TrunkCallRetryOnTonesAvailable
Specify whether to suspend call repetition when a 183 session progress is received with SDP for this line. When stopped, the caller hears "early" tones (alert, etc.) generated by the attendant.
*Default value = 0 (call repetition is NOT interrupted).
 
TrunkRecordingForAuxiliaryCallsDisabled
Specify whether to record trunk recordings for auxiliary calls (calls to/from the CTI+ controlled terminal).
*Default value = 1 (recordings are recorded)
 
WritePhoneCallListEntryOnGroupCall
Specify whether group calls are registered in the call journal.
*Default value = 1 (group calls are registered).
LinkMgr
StunRefresh
Set the refresh time in milliseconds for the STUN connection.
*Default value = 10000 (corresponds to 10 seconds).
SIPNetworkProvidedNumber
Set a fixed trunk-specific NPN (netowrk provided number) here, which overwrites the number transmitted by the server if necessary.
 
ForwardAOCMessages
Specify whether AOC (Advice of Charge) messages are to be transmitted via trunk.
*Default value =1 (AOC messages are transmitted).
 
AddExchangeHistoryInfo
Specify whether to add the "SIP History-Info" header field to the INVITEs for MS Exchange support on the trunk.
*Default value = 0 (no "SIP History-Info" fields)
PhoneMgr
AutoFirmwareUpdate
Set whether the firmware update is performed by all phones without prompting.
*Standardwert = 0 (Die Aufforderung wird angezeigt).
Swyx.Core.PresenceSync.MsTeams
Telemetry
This page displays information about the current state of the SwyxServer. You cannot make any settings.
Last modified date: 02/04/2022