When performing an anonymous registration, not the administrator but the user himself registers all handsets. The IPEI is thus automatically linked to the user.
The anonymous registration requires two steps. First, the user is created in the DECT system. Then, the user assigns handset and user via the handset of the user.
1 Select "Administration |Users".
2 Click on "New".
3 Complete the following fields, while leaving the "IPEI/IPDI" field empty. Do not delete the automatically generated "Auth. Code":
4 Click on "OK".
5 Repeat steps
(2) to
(4) for all users.
6 Assign the handsets to the users.
7 Select "DECT | System".
8 Select "With System AC" in the "Subscription" list field to activate the anonymous registration.
9 Click on "OK":
10 Run "Over Air Subscription" by using the system authentication code. The IPDI number appears in the "Anonymous" list. To start the list, select "Users | Anonymous".
On the handset, the user has to carry out the following steps:
11 Dial the respective master ID + extension + individual AC code and hang up.
If "0" is the master ID, "200" the extension and "1234" the AC code, the user has to dial "*0*200*1234#" If "200" is already assigned to another handset, this identity will be assigned to the new handset. The old handset is moved to the "Anonymous" list, as soon as the new handset is registered.
12 Steps
(10) to
(11) have to be repeated for all handsets.
| For security reasons, set the "Subscription Method" to "Disabled" to prevent someone who knows the AC system from logging on to the IP DECT system. |