Links
The output “Timeout” must always be connected in order to save an error-free script. Otherwise, the error message “No connection to ‘Timeout’” will appear in the Info pane. The outputs with the individual DTMF characters must not necessarily be connected. If a connected output is not visible on the interface, the warning “DTMF output ‘…’ connected but not visible” will appear in the Info pane.
The outputs are described as follows:
0-9, #, * | This exit is chosen if the appropriate character (0-9,#,*) has been detected. |
Timeout | This exit is chosen if no DTMF sound was received during the timeout. |
Disconnected | This exit is selected if the connection is disconnected. |
In the first column "Visible", you can define whether each output should be shown in the script window.
The "Visible" column is only used to define the visibility of the links in the script window. This setting helps to maintain the clarity of the script. You cannot remove outputs, i.e. the connections must be kept, otherwise an error will occur in the script.
The second column "Default" contains the default name of the output. This provides information about events during the execution of a block so that additional appropriate connections can be created. This fixed name cannot be changed. You can assign your own identifying names to the various contact surfaces in the column "Link name". This name will later appear in the block in the grid interface.
In the last column "Linked to" you see which block input this output is connected to. Here you have the option of selecting a link from a select list, which contains all available blocks.
Last modified date: 06.16.2023