help | 17 SwyxLink (Server-Server Connection) | Configuring a SwyxLink Trunk | "Number Signaling"
"Number Signaling"
Here you specify whether, and how, the numbers for outgoing calls via this trunk should be signaled.
 
*Always suppress number
In this case no number is signaled to the person being called (XXX), regardless of which number was configured for this trunk.
* 
In Germany, the destination numbers 110 and 112 are reserved for emergency calls. The outgoing call number to these destination numbers is always signalled.
 
*Always Use This Number:
You can specify a number or SIP-URI here which will always be signaled to the person being called (e.g. the operator's number), regardless of which number was configured for this trunk.
* 
The number must be entered in canonical number format.
 
*Signal Caller Number
Although the caller number is not configured for this trunk, the caller number is signaled to the person being called.
Example:
Customer A (number 88 333 44) calls employee B (number 55 666 77). Forwarding to his mobile phone is activated, i. e. an incoming call is routed outwards again. If the customer's number (88 333 44) should also be signaled externally, then this can be allowed here, although this number was not defined for this trunk.
*Use:
You can specify here which number this trunk uses. You can specify the action for numbers that are assigned to this trunk as well as for numbers which have no assignment.
Use:
If assigned to this trunk, otherwise:
If assigned to this trunk, otherwise:
Entry
Origination Number
Number of the transferor
 
 
 
Hide number
 
 
 
Don't use this trunk
 
 
 
Use the following number
 
<Number>
 
Number of the transferor
Origination Number
Hide number
 
 
 
Don't use this trunk
 
 
 
Use the following number
<Number>
 
Hide number
 
 
Last modified date: 01/24/2024