help | 26 Cross-network connections | Internet connection via SwyxRemoteConnector | Configuration of SwyxIt! | Configure connection via SwyxRemoteConnector
26.1.3.1 Configure connection via SwyxRemoteConnector
* 
To enable the connection of SwyxIt! to SwyxServerviaSwyxRemoteConnector, enter the following information in the "Public server address" field since v12.20 and later:
The public endpoint (as FQDN or IP address) of the company network with corresponding ports over which the Authentication Service must be entered in the connection settings of SwyxIt!. For example, connect.server.net:9101
 
How to configure the connection via SwyxRemoteConnector 
1 Install SwyxIt! on the Windows computer.
2 Start SwyxIt!, click on "Settings| Local Settings", and open the "Local Settings" tab.
3 Click on the "More" button.
The "RemoteConnector" dialog window will appear.
4 Select on of the three connection modes.
5 In the field "Public server address:", enter the public IP address for the company network and the port configured on the company router for .
6 In the field "Public fallback server address:", enter the public IP address for the company network and the second port configured on the company router for SwyxStandby servers.
7 Confirm your information by clicking on the "OK" button.
The connection to SwyxServer via RemoteConnector is configured.
* 
In SwyxON, the password for the generation of the Client certificate is not required.
 
Last modified date: 01/24/2024