In SwyxServer the ISDN trunk group and the trunks must be appropriately configured for the access to the superior system.
2 In the context menu, select "Properties".
3 On the "Profile" tab, select the profile "Internal Lines".
The number format is set according to the default setting.
4 The public line access of the PBX is the digit or sequence of digits that must be dialed within the main telecommunication system to gain access to an external line. Ask the main telecommunication system administrator about this.
5 If other number ranges are used in the range of the sub-PBX, configure the number replacement accordingly.
6 On the "Routing Records" tab, specify which calls from SwyxWare will be forwarded to the superior system.
7 On the "Rights" tab, define the rights of the calls that are made from this system into SwyxWare.
8 Select the location of the sub-PBX on the "Location" tab.
9 End the configuration of the ISDN trunk group with "OK".
10 Next, set up one or more ISDN trunks belonging to this trunk group. You can allow only incoming or only outgoings calls for these, for example.
| Please make certain that the numbers assigned to users are within the range that you have configured in the main telecommunication system for SwyxWare. This should especially be checked when new numbers are allocated by the administrator. |
