Configuration of the standby master base station (standby scenario 3)
Use of a standby master SwyxDECT 800 base station is optional. This ensures the correct functioning of the system in case of a master base station failure.
This is how you configure the standby master SwyxDECT 800
4 Enter the user name and the password for the system. The inputs should be the same as the user name and password of the master SwyxDECT 800 (
'DECT | System' page).
7 Enter the IP address of the SwyxServer .
11 Start the base station again under 'Reset', so that the effect of the configuration changes can be seen.