Configuration of two base stations as „Mirror“
This chapter describes the configuration of two equal master base stations in mode “Mirror”.
The IP Address of the second base station must be entered during the configuration of the first base station. During the configuration of the second base station please enter the IP Address of the first base station.
When you have finished with the configuration of the base stations, one of them must be set active. If required you can switch between the base stations during an ongoing operation.
|
|
It is recommended that the components DECT Master and radio synchronization are installed on the same station.
|
Configuration of two base stations as „Mirror“ ()
1 Define the IP address of the both SwyxDECT 800 and gain access to SwyxDECT 800 via the web interface (
Starting the SwyxDECT 800).
2 Mains power supply for the base station
Open the page “General | Admin”.
In the field "Device name", enter the name (e.g. Warehouse, Purchasing) of the base station.
Now enter the new user name in the field "User name", and the password in the field "Password". Repeat the input of the password in the text field below.
Standard user name: admin
Standard password: changeme
Click on "OK".
3 Time server
Open the page “General | NTP”.
Select the "Management | Time settings" option, and enter the IP address of your Windows server or a public time server (e.g. ptbtime1.ptb.de) in the field "Time Server".
In the field "Interval", define the time period after which the internal time is compared again with that of the time server; and select the relevant time zone in the selection field "Timezone".
4 Static IP address
Open the page “LAN | DHCP”.
In the field "mode", choose “disabled”.
Click on “OK”.
Open the page “LAN | IP”.
In the fields: "IP address", "Network mask", "Default Gateway" and "DNS Server", enter the data you have obtained from your administrator.
Click on “OK”.
5 Set the mode to “Mirror”.
Open the page “DECT | Master”.
In the field "mode", choose “Mirror”.
Click on “OK”.
6 Restart the system under "Reset | Reset” (
Reset).
7 IP Address of another master base station
Open the page “DECT | Master” and enter in the field “Mirror Master” the IP Address of the second master base station.
Click on “OK”.
8 Restart the system under "Reset | Reset” (
Reset).
9 System properties such as name and password, frequency band and tones, Codecs and packet sizes
Open the page “DECT | System”.
Username and Password
Enter a name in the field "System Name".
Enter a password in the field "Password", and repeat the input in the field below.
Tones
Select the tone you want in the field "Tones" (e.g. EUROPE-PBX).
Frequency band
Select the frequency band you want in the field "Frequency" (e.g. Europe).
Codecs and Profiles
Select "G711u" in the field "Coder" and enter "20" in the field "Frame (ms)".
Click on “OK”.
10 Restart the system under "Reset | Reset” (
Reset).
11 Configuring SwyxServer
Open the page “DECT | Master”.
Activate the option "Enable Pari function".
Select the protocol "SIP" in the selection list.
Enter the IP address of SwyxServer under IP PBX in the field "Proxy".
Set the maximum length of the internal numbers. This length defines whether the call is an internal or external call, and the respective ringing tones are used (Standard 3).
Activate the option "Enbloc Dialing" to enable block dialing.
In the selection list "Hold signaling", select the option "sendonly". The corresponding SIP HOLD INVITE message is then filled with this.
12 Restart the system under "Reset | Reset” (
Reset).
13 Voicemail notification (Message Waiting Indication)
Open the page “DECT | Suppl”. Serv.“.
Activate the option "Enable Supplementary Services".
In the "MWI Mode" field, select the option „Fixed interrogate and fixed notify number“.
In the fields "MWI Interrogate Number" and "MWI Notify Number", enter the string "##10".
Click on “OK”.
14 Set the master IP address.
The IP address of the master base station must be known to all base stations.
Open the page “DECT | Radio”.
Enter the name, the password and the address of the master base station into the field "Pari Master IP Address".
The IP address of the standby master base station can additionally be entered.
Click on “OK”.
15 Restart the system under "Reset | Reset” (
Reset).
16 SARI
Open the page "DECT | SARI" and enter the SARI you have received upon delivery.
17 Radio synchronisation
Open the page “DECT | Air Sync”.
In the field "mode", choose “Master”.
Click on “OK”.
18 VoIP Configuration
Open the page “VoIP | SIP”.
Check whether the option "Add instance id to the user registration with the IP-PBX" is deactivated and delete the "Session Timer".
19 Start SwyxDECT 800 again, so that the effect of the configuration changes can be seen (
Reset).
20 Repeat the steps 2-18 to configure the second base station.
21 Activating the base station
Open the page “DECT | Master” on one of the two master base stations and click on “Activate mirror”.
Click on “OK”.
“Mirror Status: Active” - the selected master base station is set active.
To activate the other master base station, open the page “DECT | Master” on the master base station that is not active and click on the link “Switch master”.
