The Graphical Script Editor Blocks Optional Blocks-Actions Record Message Links
On this tab you will find all outputs associated with this block. The outputs are described as follows:
Recorded (timeout)
This exit is chosen, if a message was recorded. The telephone connection continues to exist.
Recorded (disconnected)
This exit is chosen if the call was disconnected during the recording process, a message was recorded.
Get DTMF Char
This exit is chosen if a DTMF character is detected during the announcement. The recording was interrupted.
Silence detected
This exit is chosen if a pause of the defined length was detected. The recording was therefore interrupted.
This exit is selected, if the call is interrupted. A message was not recorded.
In the first column "Visible", you can define whether each output should be shown in the script window.
The "Visible" column is only used to define the visibility of the links in the script window. This setting helps to maintain the clarity of the script. You cannot remove outputs, i.e. the connections must be kept, otherwise an error will occur in the script.
The second column "Default" contains the default name of the output. This provides information about events during the execution of a block so that additional appropriate connections can be created. This fixed name cannot be changed. You can assign your own identifying names to the various contact surfaces in the column "Link name". This name will later appear in the block in the grid interface.
In the last column "Linked to" you see which block input this output is connected to. Here you have the option of selecting a link from a select list, which contains all available blocks.