help | 8 Trunks | Forwarding and number substitution | Priority | Extended Least Cost Routing
Extended Least Cost Routing
With the extended least-cost routing, the use of remote access to the public telephone network (SwyxGate) is possible.
Example:
When a SwyxWare user at the Dortmund site connects to a subscriber near the London site, the SwyxServer at the Dortmund site can now determine based on the parameters of the trunk assigned to London that the dialed subscriber can be reached via the corresponding trunk. This means that the telephone connection from London to Dortmund is e. g. first made via the WAN connection and then via the ISDN Trunk in Dortmund to the external subscriber in ISDN.
Of course, for the connection via SwyxGate in London to the external subscriber, the least-cost routing of SwyxServer in London and the corresponding service provider is then used again.
* 
It is often desired that the calls from Dortmund can also signal a Dortmund number. On the "Call numbers" tab of the corresponding trunk, you define which call number is signaled to a call partner. The trunk in London must then be able to use foreign (i.e. Dortmund) numbers on the outgoing call. The "CLIP no Screening" function is used for this purpose and must be requested separately from your provider.
 
To set a forwarding entry 
1 In the menu, select Connections | Trunks.
2 Select Trunk groups.
3 A list appears with all Trunk Groups.
4 Click on in the line of the speed dial selected.
5 Select in the menu <Trunk group name> | Forwarding & Replacement.
*The tab Forwarding entries.
6 Click on Add forwarding entry.
*The configuration wizard appears Forwarding entries.
7 Enter a short description if necessary.
8 If the forwarding rule should be applied immediately, activate the checkbox Forwarding entry is activated.
9 Click on Next.
*The following tab appears Forwarding.
10 Specify which criteria regarding the phone number or URI should be used for forwarding:
Label
Explanation
Use this trunk group for the following calls
Enable this option if you want the calls to be routed through this trunk group that meet the following conditions:
Destination number/URI
Enter the public phone number or URI to be routed over this trunk. You can use placeholders for this.
With call-by-call prefix
If necessary, enter a sequence of digits to be placed in front of each destination number that is forwarded via this trunk group,
z. E.g., a call-by-call prefix: 01013
Number of repetitions
Specify how often a connection attempt should be repeated (standard: 0).
If no LCR is used, but the call-by-call prefix of a low-cost but heavily congested provider is dialed directly, these repetitions can be useful to try a low-cost provider several times.
DO NOT use this trunk group for the following calls
Enable this option if the calls with certain destinations should NOT be routed through this trunk group.
Destination number/URI
Enter the public phone number or URI that should NOT be routed via this trunk. You can use placeholders for this.
Record Priority
Specify the priority with which this forwarding is applied to a Call. You can use a value between 0 (lowest) and 1000 (highest).
11 Click on Next.
*The tab appears Source.
12 If necessary, specify whether the origin of the call is taken into account. If nothing is configured, the forwarding rule applies to all calls.
* 
You can use the two options Members of the group as well as Users of the location (e.g. All users of the "Support" group at the "Munich" site). The Phone number option can be combined with either the User or Members of the group and/or Users of the location options.
 
Label
Explanation
Phone number
Activate the option and enter an internal phone number or URI. The forwarding applies to all calls signaling this phone number or URI (internal SwyxWare user or group). If the calls coming in through this trunk are to be forwarded according to this rule, enter the phone number or URI in canonical format. The number is matched from the beginning onward. If you enter "21", for example, the forwarding rule applies to all callers whose own phone number begins with "21".
Users
Enable the option and select a user for whom the forwarding should apply.
Members of the group
Activate the option and select a group. The forwarding applies to all members of the group.
Users of location
Activate the option and select a location. The forwarding applies to all Users.
13 Click on Next.
*The tab Time limit.
14 Set time conditions (days of the week, time) for forwarding.
Label
Explanation
Apply forwarding entry on specific day(s)
Enable the option if you want the forwarding to apply on certain days of the week.
Then activate the desired days of the week.
Use Routing Record on specific Time of Day
Enable the option if you want the forwarding to apply at specific times.
Then select the desired times (From and To) to define a time section.
15 Click on OK.
*The forwarding is created and appears in the list of forwarding entries.
You can adjust or delete the redirects using the buttons and .
Last modified date: 01/19/2024