help | 12 Devices | DECT phones | DCF DECT system put into operation | Configure subnet base stations (optional)
12.3.1.6 Configure subnet base stations (optional)
If a base station is operated in a subnet, this base station must be added to the DECT system manually.
To configure subnet base stations 
The base station object was created in Swyx Control Center, see Create DECT base station(s)
1 In the address line of your browser, enter 'https://<IP address of the subnet base station>' to open the administration web interface of the device.
*The login dialog appears.
2 Enter the default name "admin" and the default password "changeme".
3 Click on Login and subsequently auf OK.
*The Ascom configuration wizard appears.
4 Go through the configuration wizard by clicking on Next until you reach the page Radio.
5 On the page Radio page, enter the following settings:
Label
Explanation
Name
Enter "DECT".
Password
Under Password, enter the activation key.
(The activation key can be found in Swyx Control Center under Devices | DECT | DECT Base Stations | Edit DECT Base Station).
PARI Master IP Address
Enter the IP address of the master base station.
* 
If the configuration wizard is not displayed, you can find these settings on the administration interface under DECT | Radio.
 
6 Click on OK.
7 Restart the base station.
Last modified date: 01/19/2024