Changing the CTI mode after Shut down and Restart of SwyxIt!
SwyxIt!By activating the checkbox "Use CTI each time I start SwyxIt!", you select whether the CTI mode is active for the current session only or set as default for every start.
When this option is activated before shutting down CTI SwyxIt!, the following note appears after restarting the program (depending on whether the CTI pairing could be established automatically or not:
CTI mode has been established automatically
Click on "Continue Using CTI" to further control SwyxPhone, the telephony device or an external phone with CTI SwyxIt!.
Click on "Change CTI configuration" to configure your CTI pairing.
Click on "Switch off CTI" to end the CTI mode and use SwyxIt! in normal mode.
CTI mode could not be established automatically
In this case, the round icon appears in the “Options” tab on the skin, until the CTI pairing could be re-established automatically.
It is possible that either SwyxPhone, the telephony device or the external telephone are switched off, or you are not logged on to SwyxPhone. Switch on your device or log on to SwyxPhone with your PIN.
