When the phones are set up at the workstations and connected to the network, SwyxWare Administration is used to search for the new phones and distribute the IP address of the PhoneManager.
See also the SwyxPhone documentation.
1 Start SwyxWare Administration.
In the Server Properties open the “SwyxPhone Search” tab.
2 Enter the IP address range from which the IP addresses (per DHCP) will be assigned.
3 Begin the search by clicking on “Start”.
The PhoneController stops the search automatically after an hour.
4 Connect one or more SwyxPhones on to the LAN and the power supply.
SwyxPhone is found by the PhoneController and logs on to the PhoneManager using the assigned IP address.
5 On the display of the SwyxPhone Lxxx the prompt for PIN entry will appear.
If the user enters his PIN and confirms this with “OK”, the SwyxPhone is then logged on.