User
Under the menu item "Extensions", the following settings are possible:
Add and edit users.
Display all of the system's registered users
Select registered users to delete or deregister handsets
Add user
Before registration of the new user please keep at hand the serial number (IPEI) of the concerning handset ready. The serial number can be displayed in the menu of SwyxPhone D510 under "Settings | Status".
How to add a new user
1 Select the "Extensions" option in the menu bar.
2 Click on "Add extensions."
3 Enter in the field "IPEI" the serial number of the handset.
4 Enter in the field "AC" the 4 digits number, which is used to identify the user (handset) for the registration at the base station.
5 Enter the number in the "SIP User" field and the SIP user name in the "Authentication Name" field that you also assigned on the SwyxServer during the SIP registration (
The “SIP Registration" Tab).
6 Under "Authentication Password" enter the SIP password that you also assigned in SwyxServer during SIP registration.
7 In the "display information" field, enter the name that should appear on the user's SwyxPhone D510 display.
8 Enter the phone number in the field "Mailbox Name".
9 You can use the "Mailbox Number" field, e.g. to enter the function code for remote query (##10).
10 In the "Server" field, select the SwyxServer on which the user is configured.
11 Click on "Save."
12 Select the desired user.
13 Click on "Log-on handsets".
The log-on mode for the base station is enabled.
Servers
How to add a new server
1 In the menu bar, click on "Extensions | Servers".
2 Choose "add server."
3 Enter the SwyxServer's IP address in the "Registrar" field.
4 If you are using a standby server, enter the standby server's IP address in the "secondary registrar address:" field.
5 Activate "SIP Session Timers."
6 Enter the value "90" in the "SessionTimer Value" field.
7 Select "SIP INFO" in the "DTMF signalization" field.
| In order to support Codec G.729, an optional module for the base station is required (one module per base station). The codec G.729 should be placed after codec G.711U in the priority list. |
8 Confirm the entry by clicking on "save".
Repeaters
The "repeater" area can be used to extend the range of your base stations by installing additional repeaters (up to 100 repeaters per system). Up to three repeaters per base station and up to three repeaters on one chain can be used. Up to five (with G.711 five, with G.729 five, with G.722 two) simultaneous calls per repeater possible.
How to add a repeater
1 Select the "Extensions | Repeaters" option.
2 Select "Add Repeater".
3 In the field "DECT snyc mode", select "Manually".
4 Establish the DECT synchronization source.
5 Click on "Save."
6 The repeater is listed.
7 Select the repeater being registered by setting a check mark.
8 Click on "register repeater."
9 Connect the repeater to a power socket.
10 Press the button located on the repeater.
11 After a few seconds, the repeater's light will be light up in green.
12 Update the base station's web page, and the repeater will be displayed in the list.
| Avoid registering repeaters and headsets simultaneously, for this may result in interference effects. |
Last modified date: 08/01/2019