help SwyxDECT 800 System › Update of the SwyxDECT 800
Update of the SwyxDECT 800
You can perform various updates:
*Firmware of the SwyxDECT 800
*Configuration of the SwyxDECT 800
*Bootloader of the SwyxDECT 800
This is how you update the SwyxDECT 800 
1 Open the web interface of the SwyxDECT 800.
2 Authenticate yourself as administrator (name and password).
3 Switch to the "Update" page.
4 Choose what you want to update:
*Configuration (Config)
A previously saved configuration can be loaded and activated here.
For how to save the configuration of a SwyxDECT 800, please refer to Backup.
*Software of the station (Firmware)
* 
The upload should on no account be interrupted, as otherwise the firmware in the terminal will be destroyed. Do not perform a restart before the upload has been completely executed! If for some reason an interruption does occur, you must upload the firmware again. Use the program "gwload.exe" for this.
 
*Startup file (Boot)
You can update the startup file here.
5 Enter the URL for the relevant update file.
6 Choose "Upload" to start the update process.
7 Then do a reset or idle reset. See Reset.
Last modified date: 08/01/2019